ProMaster Desktop Broadcast Stand

Description

The 

ProMaster Desktop Broadcast Stand clamps to the edge of a desk, table, or countertop surface up to 2" thick. It supports two accessories while reaching over and around your computer.Use the Desktop Broadcast Stand to support two objects like a camera and a light, or a light and a mic, or ??? Position them at any angle you like using both ball heads. Raise and lower the main upright using its 3 sections with a range of 17 5/8" (min. height) to 41 3/4" (max. height). Then clamp-on the extension arm anyplace along the upright to hold a second accessory. The ball head on the upright is removable, revealing a common 1/4"-20 bolt for an alternative mounting method. The ball head on the extension arm is permanently connected. * Note: The clamping surface must have a minimum 2" overhang to properly support the Desktop Broadcast Stand, and it may be up to 2" thick.

Features:

Clamps on surfaces up to 2" thick

Adjustable Height

Two ball heads for perfect positioning

Technical

Specs:
Minimum height: 17 5/8" / 44.8 cmMaximum height: 41 3/4" / 106 cmLength of extension arm: 14 1/4" / 36.2 cmMin and max height are measured from desktop to top of main ball head. Length of extension arm is measured from the upright to the end of the arm's ball head.Weight of entire unit: 22 3/8 oz / 634.4 gWeight of main post: 13 3/8 oz / 379.2 gWeight of extension arm: 6 3/4 oz / 191.4 gWeight of removable ball head: 2 1/4 oz / 63.8 gMax. load of main post: 3 lbs / 1.36 kgMax load of extension arm: 1 1/2 lbs / 0.68 kgMaximum thickness of clamping surface: 2" / 5 cm
Clamping surfaces may include a desktop, table top, countertop, workbench, and more.

In the box:
1x ProMaster Desktop Broadcast Stand